Question/Problem

Wedge Activation Limit Exceeded Alarm on the S2000 Tilt Tray Sorter 

Environment

CSC3 (LINUX) 

Answer/Solution

Wedge activation limit exceeded alarm on the Diagnoses Screen in CSC3 MMI indicates that the wedges have reached an activation threshold after which they will have to be inspected/serviced.

Wedge activation limit is set at 200,000 for this example site. Once the wedges reach this limit, the alarms will be posted. Maintenance team will need to physically inspect the wedge and can reset the counter after. 

Once inspected, the counter can be reset from Main Menu > Maintenance System > Misc. Reports > Service Counters > Reset Wedge-Counters  

Type in the ISD number for the wedge, press Enter to list available Counters and hit F12 to reset a specific counter 

The service limits are set in Maintenance System --> Configuration --> Configuration setup --> Service limits.  



The Service limits can be adjusted here. 

DISCLAIMER:

Information in this document is subject to change without notice and does not represent a commitment on the part of Intelligrated. This information is typical of the questions and general advice given; however, your particular case and circumstances may produce different results or require different recommendations. Therefore, use of this information is not a suitable replacement for contacting Intelligrated Technical Service engineering for specific recommendations and solutions to your application.

No part of this article may be reproduced or transmitted in any form or by any means including recording, or information storage and retrieval systems, for any purpose without the express written permission of Intelligrated. All information contained within the article is private and confidential and the sole property of Intelligrated.

In no event, shall Intelligrated be liable for any damages whatsoever including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss, even if Intelligrated has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.