Question/Problem
When running a sorter calibration in ICW, the results screen is not shown after the test completes.
Environment
Answer/Solution
ICW sites with multiple sorters need to have the calibrations values screen configured for the sorter that is being calibrated. For example, a receiving sorter and a shipping sorter would both have their own calibration values. Each Calibration Values screen typically only displays the values for a single sorter.
When completing a calibration, the calibration values screen for the appropriate sorter needs to be available. If it's not, go to Administration > Edit Project Views. Locate the Diagnostics tab on the left side. Then locate the sorter calibration tabs (should be under CommandCenter.dll, make sure to select the correct type based on the type of sorter). Drag the Sorter Diagnostics Values from right to left and add it on the same level as the Diagnostic Routine and any other Sorter Diagnostics Values. Right click the screen that was just added and select "Edit Configuration". Change the name to a clear description of the sorter this is for, then change the "sorter_id" to the correct sorter ID number*. Save the configuration. When done, save and close the view.
*The "sorter_id" can be found in the ICW Database Sorters table under the "physicalSorterID".
DISCLAIMER:
Information in this document is
subject to change without notice and does not represent a commitment on the
part of Intelligrated. This information is typical of the questions and general
advice given; however, your particular case and
circumstances may produce different results or require different
recommendations. Therefore, use of this information is not a suitable
replacement for contacting Intelligrated Technical Service engineering for
specific recommendations and solutions to your application.
No part of this article may be
reproduced or transmitted in any form or by any means including recording, or
information storage and retrieval systems, for any purpose without the express
written permission of Intelligrated. All information contained within the
article is private and confidential and the sole property of Intelligrated.
In no event, shall Intelligrated be
liable for any damages whatsoever including, without limitation, damages for
loss of business profits, business interruption, loss of business information,
or other pecuniary loss, even if Intelligrated has been advised of the
possibility of such damages. Because some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, the above limitation
may not apply to you.