- Log on to the server using Putty and SSH (Putwall Server IP is 10.31.8.73 and port is 22)
2. Log on as user: replace, key in the password and press Enter.
| NOTE |
QVC IT retains ownership of the admin credentials associated with their account. As per the customer’s internal security policy, the admin password must be reset on a regular basis to ensure continued account security and compliance. |
→ the screen shows the following.
1. Replace Device
2. Exit
3. Type 1 (Replace Device) and press Enter.
→ The screen shows the following:
Enter section or scan slot
4. Scan the label or key in the QVC slot location without using a hyphen followed by:
_PACK01 if you are replacing a device on the back (PACK) side of the put wall
OR
_PUT01 if you are replacing a device on the front (PUT) side of the put wall
(Example: WC01B08_PACK01)
and press Enter.
→ The laptop shows the following.
Activate New Device?
5. Press any button on the new cL device.
→ The laptop shows the following.
Finalize Replace (y/n)
6. To confirm the replacement, enter y and press Enter.
→ The laptop shows the following.
DB Update Succeeded
Enter section
Enter e to exit the program
7. If you want to continue replacing devices, key-enter the appropriate location ID. OR, if you want to stop replacing devices, enter e and press
Enter.
The steps below are already outdated.
