Question/Problem
To recover from Object Scanner TD not positioned correctly Fault:
Environment
Lenze PLC
Transfer Device
iCollector
Answer/Solution
- This should only be done if the issue is still occurring after an object scanner calibration was completed
Ideal Reteaching Process
- Calibrate the camera and is inline with the channel 1,1
- Put the machine in manual orders through radio buttons
- Put the system in production execute.
- Hit RETEACHING RACK option.
- Once all your channel's teached button turns grey, put it in Teaching radio button mode.
- System will start teaching and will be stopped when completed.
- Reset the alarm events and put system in Automatic.
- If the system runs good for 10 minutes, stop the machine, save the values and put it in auto again to continue the production. ( when press save the button should toggle( go down) and when the values are saved, button will come out( un toggle ) by itself.
Related items
[This section is for attachments and/or links to other items.
Attached documents shall be up-to-date, correct and
using Honeywell standard templates.]
Internal Notes
[Section is meant for information only available for internal use.
This includes references to internal records, such as Jira tickets, bug
numbers, etc.]
***If there is information in this section prior to migration
to SalesForce, then it may NOT be published. This information will be
fully visible along with all information above.***
Reason for confidentiality
#NotValidated
[Section is meant for a brief reason for any data recorded in
Internal Notes above, or any reason that the general article cannot be released
to the public. Can be updated to #Validated once reused and agreed by KCS
Contributor]
***If there is information in this section prior to migration
to SalesForce, then it may NOT be published. This information will be
fully visible along with all information above.***
DISCLAIMER:
Information in this document is subject to
change without notice and does not represent a commitment on the part of
Intelligrated. This information is typical of the questions and general advice
given; however, your particular case and
circumstances may produce different results or require different
recommendations. Therefore, use of this information is not a suitable
replacement for contacting Intelligrated Technical Service engineering for
specific recommendations and solutions to your application.
No part of this article may be reproduced or transmitted
in any form or by any means including recording, or information storage and
retrieval systems, for any purpose without the express written permission of
Intelligrated. All information contained within the article is private and
confidential and the sole property of Intelligrated.
In no event, shall Intelligrated be liable for
any damages whatsoever including, without limitation, damages for loss of
business profits, business interruption, loss of business information, or other
pecuniary loss, even if Intelligrated has been advised of the possibility of
such damages. Because some states do not allow the exclusion or limitation of
liability for consequential or incidental damages, the above limitation may not
apply to you.
Template updated 2022-09-20 kwk
Pending approval