Question/Problem

When Pick/Place Lidar is being replaced due to any reason , we need to configure the parameters to the new lidar.

 

Environment

Sopas Software

USB Cable to connect the Lidar to the laptop

Sick Lidar Tim351

Answer/Solution

1. Connect old Lidar with the laptops  using USB cable

2. Open Sopas tool.

3. you can see the Connected Lidars, they will appear as online.

3. Follow below KB Article to export the File :

https://dashboard.intelligrated.com/knowledgebase/Article.aspx?article=23a5f3ad-9a91-4ef2-b913-9862f20404e0

4. Now  remove the old lidar and plug in the new one , connect it through laptop using usb cable.

5. Again Open the Sopas tool and import the File from the location you exported.

6. Once Imported ,Save the parameter:

   

 

 

 

 

 

Related items

 

[This section is for attachments and/or links to other items. Attached documents shall be up-to-date, correct and using Honeywell standard templates.]

 

Internal Notes

 

[Section is meant for information only available for internal use. This includes references to internal records, such as Jira tickets, bug numbers, etc.]

***If there is information in this section prior to migration to SalesForce, then it may NOT be published. This information will be fully visible along with all information above.***

 

Reason for confidentiality

 

#NotValidated

[Section is meant for a brief reason for any data recorded in Internal Notes above, or any reason that the general article cannot be released to the public. Can be updated to (hashtag)Validated once reused and agreed by KCS Contributor]

***If there is information in this section prior to migration to SalesForce, then it may NOT be published. This information will be fully visible along with all information above.***

 

DISCLAIMER:

Information in this document is subject to change without notice and does not represent a commitment on the part of Intelligrated. This information is typical of the questions and general advice given; however, your particular case and circumstances may produce different results or require different recommendations. Therefore, use of this information is not a suitable replacement for contacting Intelligrated Technical Service engineering for specific recommendations and solutions to your application.

 

No part of this article may be reproduced or transmitted in any form or by any means including recording, or information storage and retrieval systems, for any purpose without the express written permission of Intelligrated. All information contained within the article is private and confidential and the sole property of Intelligrated.

 

In no event, shall Intelligrated be liable for any damages whatsoever including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss, even if Intelligrated has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

 

Template updated 2024-11-27 kwk