Close Window

How to:
How to recover from TOP TM Z NUMBER 1: TargetOutsideSWLimit_MoveAbsolute
Skill required to complete this article: Controls and level is No Skill Level Association.

Question/Problem

How to recover from TOP TM Z NUMBER 1: TargetOutsideSWLimit_MoveAbsolute

Error:

 

 

Environment

PLC Desinger (Lenze)

Bomgar Remote Connection

 

Answer/Solution

1.  Once you get an error : TOP TM Z NUMBER 1 (TargetOutsideSWLimit_MoveAbsolute), check if the GAP Sensor is Clear to safely move down TD for inspection

 

 

 

 

2. Ensure with site if there is no visual obstacles between racking and TD to move it down ( Manual Mode)  for inspection.

 

 

3. Wipe down the sensor, check the cable cover and then reset the ICL. 

 

 

  

Related items

 

[This section is for attachments and/or links to other items. Attached documents shall be up-to-date, correct and using Honeywell standard templates.]

 

Internal Notes

 

[Section is meant for information only available for internal use. This includes references to internal records, such as Jira tickets, bug numbers, etc.]

***If there is information in this section prior to migration to SalesForce, then it may NOT be published. This information will be fully visible along with all information above.***

 

Reason for confidentiality

 

#NotValidated

[Section is meant for a brief reason for any data recorded in Internal Notes above, or any reason that the general article cannot be released to the public. Can be updated to #Validated once reused and agreed by KCS Contributor]

***If there is information in this section prior to migration to SalesForce, then it may NOT be published. This information will be fully visible along with all information above.***

 

DISCLAIMER:

Information in this document is subject to change without notice and does not represent a commitment on the part of Intelligrated. This information is typical of the questions and general advice given; however, your particular case and circumstances may produce different results or require different recommendations. Therefore, use of this information is not a suitable replacement for contacting Intelligrated Technical Service engineering for specific recommendations and solutions to your application.

 

No part of this article may be reproduced or transmitted in any form or by any means including recording, or information storage and retrieval systems, for any purpose without the express written permission of Intelligrated. All information contained within the article is private and confidential and the sole property of Intelligrated.

 

In no event, shall Intelligrated be liable for any damages whatsoever including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss, even if Intelligrated has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

 

Template updated 2022-09-20 kwk Pending approval

 Related Articles
No Related Articles Available.
 Article Info
 Article ID:  KB-12188
 Published on  3/7/2024
 Last Modified on  3/7/2024
 Last Modified by  Sourabh Magdum
 Original URL:  https://dashboard.intelligrated.com//Knowledgebase/Article.aspx?article=1d1f1fec-9b21-488f-a5cc-344e88b507e8
Close Window